87C196LB View Datasheet(PDF) - Intel
Part Name
Description
Manufacturer
87C196LB Datasheet PDF : 19 Pages
| |||
®
5.1 DC Characteristics
AUTOMOTIVE
Symbol
Table 6. DC Characteristics at VCC = 4.5V to 5.5V
Parameter
Min Typical Max Units Test Conditions (Note 4)
ICC
VCC supply current
(–40° C to +125° C
ambient)
ICC1
Active mode supply cur-
rent (typical)
FXTAL1 = 20 MHz,
50
TBD
mA VCC = VPP = VREF = 5.5V
(While device is in reset)
50
mA
IREF
A/D reference supply
current
2
TBD
mA
IIDLE
Idle mode current
IPD
Powerdown mode
current
15
TBD
mA FXTAL1 = 20 MHz,
VCC = VPP = VREF = 5.5V
50
TBD
µA
VCC = VPP = VREF = 5.5V
(Note 6)
VIL
Input low voltage
(all pins)
– 0.5V
0.3 VCC
V
VIH
Input high voltage (all
0.7 VCC
pins)
VCC + 0.5 V (Note 7)
VOL
Output low voltage
(outputs configured as
complementary)
VOH
Output high voltage
VCC – 0.3
(outputs configured as VCC – 0.7
complementary)
VCC – 1.5
ILI
Input leakage current
(standard inputs)
0.3
0.45
1.5
±8
V IOL = 200 µA (Notes 3, 5)
V IOL = 3.2 mA
V IOL = 7.0 mA
V IOH = – 200 µA (Notes 3, 5)
V IOH = – 3.2 mA
V IOH = – 7.0 mA
µA VSS ≤ VIN ≤ VCC (Note 2)
ILI1
Input leakage current
(port 0—A/D inputs)
±1
µA VSS ≤ VIN ≤ VREF
IIH
Input high current (NMI
pin, bond PAO only)
+175
µA VSS ≤ VIN ≤ VCC
VOL2
Output low voltage in
reset
1
V IOL = 6 µA (Notes 1, 8)
NOTES:
1. All bidirectional pins except P5.1/INST and P2.7/CLKOUT which are excluded because they are not
weakly pulled low in reset. Bidirectional pins include ports 1–6.
2. Standard input pins include XTAL1, EA#, RESET#, and ports 1–6 when configured as inputs.
3. All bidirectional pins when configured as complementary outputs.
4. Device is static and should operate below 1 Hz, but is only tested down to 4 MHz with the PLL
enabled. With the PLL bypassed, the device is only tested down to 8MHz.
5. Maximum IOLor IOH currents per pin will be characterized and published at a later date. Target values
are ± 10 mA.
6. Typicals are based on a limited number of samples and are not guaranteed. The values listed are at
room temperature and VREF = VCC = 5.5V.
7. VIH max for port 0 is VREF + 0.5V.
8. This specification is not tested in production and is based upon theoretical estimates and/or product
characterization.
PRODUCT PREVIEW
15
Share Link: 