TS2012IQT View Datasheet(PDF) - STMicroelectronics
Part Name
Description
Manufacturer
TS2012IQT Datasheet PDF : 30 Pages
| |||
TS2012
Absolute maximum ratings and operating conditions
1
Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings
Symbol
Parameter
Value
Unit
VCC
Vi
Toper
Tstg
Tj
Rthja
Pd
ESD
Supply voltage (1)
Input voltage (2)
Operating free air temperature range
Storage temperature
Maximum junction temperature
Thermal resistance junction to ambient (3)
Power dissipation
HBM: human body model(5)
MM: machine model(6)
6
GND to VCC
-40 to + 85
-65 to +150
150
100
Internally limited(4)
2
200
V
V
°C
°C
°C
°C/W
kV
V
Latch-up Latch-up immunity
200
mA
VSTBY Standby pin voltage maximum voltage
GND to VCC
V
Lead temperature (soldering, 10sec)
260
°C
1. All voltage values are measured with respect to the ground pin.
2. The magnitude of the input signal must never exceed VCC + 0.3V / GND - 0.3V.
3. The device is protected in case of over temperature by a thermal shutdown active @ 150°C.
4. Exceeding the power derating curves during a long period will cause abnormal operation.
5. Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for
all couples of pin combinations with other pins floating.
6. Machine model: a 200 pF cap is charged to the specified voltage, then discharged directly between two
pins of the device with no external series resistor (internal resistor < 5 Ω), done for all couples of pin
combinations with other pins floating.
3/30
Share Link: 