DF8064101211300SR0VY View Datasheet(PDF) - Intel

Part Name

Description

Manufacturer

DF8064101211300SR0VY

Intel® Atom™ Processor D2000 and N2000 Series

Intel 

1.3

1.4

Direct Media Interface Features

• Compliant to Direct Media Interface (DMI)

• Support 2 lanes in each direction for N2000 series processor and 4 lanes in each

direction for D2000 series, Gen1 (2.5 Gbps) per lane per direction, point-to-point

DMI interface to Intel® NM10 Express Chipset or PCH respectively.

• The N2000 series processor can only work on boards that have a DMI x2

connection. It will not work on a board with a DMI x4 connection. While the D2000

series processor can only work on the boards have a DMI x4 connection.

• 100 MHz reference.

• Support 64 bit downstream address (only 36-bit addressable from CPU)

• Support APIC messaging support. Will send Intel-defined “End of Interrupt”

broadcast message when initiated by CPU.

• Support messaging in both directions, including Intel-Vendor specific messages.

• Support Message Signal Interrupt (MSI) messages.

• Support Power Management state change messages.

• Support SMI, SCI and SERR error indication.

• Support PCI INTA interrupt from CHAP Counters device and Integrated Graphics.

• Support Intel® NM10 Express Chipset with on board hybrid AC-DC coupling

solution.

• Support polarity inversion (However, NM10 does not support)

Graphics Processing Unit Features

• Support Directx*9 compliant Pixel Shader* v3.0 and OGL 3.0

• 640 MHz (D2550, D2700 & N2800/N2850) and 400 MHz (D2500 & N2600/N2650)

graphic core frequency

• 200 MHz render clock frequency

• Seven display planes, Display Plane A, B, Display Sprite C (can be connected to

either pipes), Display OV (can be connected to either pipes), Cursor A, Cursor B,

and VGA

• Two display pipes, Pipe A and B support the dual independent displays

• Max Pixel Clock: SC LVDS: 112 MHz, 18bpp (N2000 series) & 18bpp and 24bpp

(D2000 series); DDI: 2x 4, 1.62GHz, 2.7GHz; VGA: up to 350MHz

• Display Ports: eDP/DP x4, HDMI, LVDS (single channel), CRT/DAC

• Embedded panel: eDP1.1 or LVDS

• External panel: DP1.1, HDMI1.3a, LVDS, CRT/DAC.

• Supports HDCP 1.3 & PAVP1.1c (D2550, D2700 & N2800/N2850 processor) for Blu-

ray playback while HDCP is needed for High Definition playback in Intel® Atom™

Processor D2000 and N2000 series

Datasheet - Volume 1 of 2

11

Share Link: