IT66121FN View Datasheet(PDF) - ITE Tech. INC.

Part Name

Description

Manufacturer

IT66121FN

Low Power Transmitter with HDMI1.4 3D

ITE Tech. INC. 

IT66121FN

16/20/24-bit YCbCr 4:2:2 with YC swap option

8/10/12-bit YCbCr 4:2:2 (CCIR-656)

BTA-T1004 format

DE-only interface

DDR option

Support HDMI1.4 3D feature

Frame packing mode up to 1080P@23.98/24Hz and 720P@59.94/60Hz

Top and Bottom up to 1080P@59.94/60Hz

Side-by-Side (Half) up to 1080P@59.94/60Hz

Side-by-Side (Full) up to 720P@59.94/60Hz

Bi-direction Color Space Conversion (CSC) between RGB and YCbCr color spaces with

programmable coefficients.

Digital audio input interface supporting

audio sample rate: 32~192 kHz

sample size: 16~24 bits

four I2S interfaces supporting 8-channel audio

S/PDIF interface supporting PCM, Dolby Digital, DTS digital audio transmission at up to

192kHz

Support for high-bit-rate (HBR) audio such as DTS-HD and Dolby TrueHD through the four I2S

interface or the S/PDIF interface, with frame rates as high as 768kHz

Compatible with IEC 60958 and IEC 61937

Software programmable HDMI output current, enabling user to optimize the performance for

fixed-cable systems or those with pre-defined cable length

MCLK input is optional for audio operation. Users could opt to implement audio input interface with

or without MCLK.

Integrated pre-programmed HDCP keys

Purely hardware HDCP engine increasing the robustness and security of HDCP operation

Monitor detection through Hot Plug Detection and Receiver Termination Detection

Embedded full-function pattern generator

Intelligent, programmable power management

Embedded hardware controlled CEC PHY

Ultra low power consumption, operation power is less than 70mw at 1080p@60Hz format.

64-pin (9x9 mm) QFN package

www.ite.com.tw

Nov-2011 Rev:0.99 3/39

Share Link: