LPC4357FET256 View Datasheet(PDF) - NXP Semiconductors.
Part Name
Description
Manufacturer
LPC4357FET256
NXP Semiconductors.
LPC4357FET256 Datasheet PDF : 162 Pages
| |||
NXP Semiconductors
Table 3. Pin description …continued
Pin name
LPC435x/3x/2x/1x
32-bit ARM Cortex-M4/M0 microcontroller
Description
P2_13
P3_0
P3_1
C16 A10 156 108 [2]
F13 A8 161 112 [2]
G11 F7 163 114 [2]
N; I/O GPIO1[13] — General purpose digital input/output pin.
PU I CTIN_4 — SCT input 4. Capture input 2 of timer 1.
- R — Function reserved.
I/O EMC_A4 — External memory address line 4.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
I/O U2_DIR — RS-485/EIA-485 output enable/direction control
for USART2.
N; I/O I2S0_RX_SCK — I2S receive clock. It is driven by the
PU
master and received by the slave. Corresponds to the signal
SCK in the I2S-bus specification.
O I2S0_RX_MCLK — I2S receive master clock.
I/O I2S0_TX_SCK — Transmit Clock. It is driven by the master
and received by the slave. Corresponds to the signal SCK in
the I2S-bus specification.
O I2S0_TX_MCLK — I2S transmit master clock.
I/O SSP0_SCK — Serial clock for SSP0.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
N; I/O I2S0_TX_WS — Transmit Word Select. It is driven by the
PU
master and received by the slave. Corresponds to the signal
WS in the I2S-bus specification.
I/O I2S0_RX_WS — Receive Word Select. It is driven by the
master and received by the slave. Corresponds to the signal
WS in the I2S-bus specification.
I CAN0_RD — CAN receiver input.
O USB1_IND1 — USB1 Port indicator LED control output 1.
I/O GPIO5[8] — General purpose digital input/output pin.
- R — Function reserved.
O LCD_VD15 — LCD data.
- R — Function reserved.
LPC435X_3X_2X_1X
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5.2 — 26 November 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
20 of 162
Share Link: