HMP8154 View Datasheet(PDF) - Renesas Electronics
Part Name
Description
Manufacturer
HMP8154 Datasheet PDF : 34 Pages
| |||
HMP8154, HMP8156A
BIT
NUMBER
7-5
FUNCTION
Input Format
4
Gamma
Select
3
Reserved
2-1
Overlay Mixing
Mode
0
Input Resolution
TABLE 13. INPUT FORMAT REGISTER
SUB ADDRESS = 02H
DESCRIPTION
000 = 16-bit 4:2:2 YCbCr
001 = 8-bit 4:2:2 YCbCr
010 = 8-bit BT.656
011 = 16-bit linear RGB
100 = 16-bit gamma-corrected RGB
101 = 24-bit linear RGB
110 = 24-bit gamma-corrected RGB
111 = Blue screen
These bits are ignored except during linear RGB input modes.
0 = 1 / 2.2
1 = 1 / 2.8
These bits must be set to “11” in 24-bit RGB input modes. Internal mixing should not be
selected in BT.656 input mode.
00 = No mixing
01 = Internal mixing
10 = External mixing
11 = Disable overlays
This bit must be set to “0” during BT.656 input mode and when the flicker filter is enabled.
0 = Full resolution (2X upscaling disabled)
1 = SIF resolution (2X upscaling enabled)
BIT
NUMBER
7
6
5
4
3
2
1-0
TABLE 14. VIDEO PROCESSING REGISTER
SUB ADDRESS = 03H
FUNCTION
DESCRIPTION
Luminance
Processing
0 = None
1 = Y Lowpass filtering enabled
Composite Video
Limiting
0 = None
1 = Lower limit of composite active video is about half the sync height
SCH Phase
Mode
0 = Never reset SCH phase
1 = Reset SCH phase every 4 (NTSC) or 8 (PAL) fields
RGB Pedestal
Enable
0 = Don’t add blanking pedestal to RGB output
1 = add blanking pedestal to RGB output
RGB pin Assignment 0 = use HMP8156 assignments
select
1 = SCART connector compatible
First Active
Line Select
This bit is ignored unless flicker filtering is enabled. This bit is ignored on the HMP8156.
0 = First line of active video in odd fields is on an odd line number
1 = First line of active video in odd fields is on an even line number
Flicker Filter
Processing
These bits must be “00” during 8-bit YCbCr and BT.656 input modes, and SIF input resolution
mode. These bits are always “00” on the HMP8156A.
00 = No flicker filtering
01 = reserved
10 = reserved
11 = 3-line flicker filtering enabled
RESET
STATE
000B
0B
0B
11B
0B
RESET
STATE
1B
0B
1B
0B
0B
0B
00B
FN4343 Rev.5.00
August 20, 2009
Page 19 of 34
Share Link: 