DSP56011 View Datasheet(PDF) - Motorola => Freescale

Part Name

Description

Manufacturer

DSP56011

24-BIT DVD DIGITAL SIGNAL PROCESSOR

Motorola => Freescale 

SECTION 2

SPECIFICATIONS

PRELIMINARY INTRODUCTION

The DSP56011 is fabricated in high density CMOS with Transistor-Transistor Logic

(TTL) compatible inputs and outputs. The DSP56011 specifications are preliminary

and are from design simulations, and may not be fully tested or guaranteed at this

early stage of the product life cycle. For design convenience, timings for 81 MHz and

95 MHz operation are included. Finalized specifications will be published after full

characterization and device qualifications are complete.

MAXIMUM RATINGS

CAUTION

This device contains circuitry protecting

against damage due to high static voltage or

electrical fields; however, normal precautions

should be taken to avoid exceeding maximum

voltage ratings. Reliability is enhanced if

unused inputs are tied to an appropriate logic

voltage level (e.g., either GND or VCC).

Note: In the calculation of timing requirements, adding a maximum value of one

specification to a minimum value of another specification does not yield a

reasonable sum. A maximum specification is calculated using a worst case

variation of process parameter values in one direction. The minimum

specification is calculated using the worst case for the same parameters in the

opposite direction. Therefore, a “maximum” value for a specification will

never occur in the same device that has a “minimum” value for another

specification; adding a maximum to a minimum represents a condition that

can never exist.

Preliminary Information

MOTOROLA

DSP56011 Technical Data Sheet, Rev. 1

2-1

Share Link: